The products covered by this scope are certain hot-rolled carbon-quality steel: (1) universal mill plates (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm, and of a nominal or actual thickness of not less than 4 mm, which are cut-to-length (not in coils) and without patterns in relief), of iron or non-alloy-quality steel; and (2) flat-rolled products, hot-rolled, of a nominal or actual thickness of 4.75 mm or more and of a width which exceeds 150 mm and measures at least twice the thickness, and which are cut-to-length (not in coils).
Steel products to be included in this scope are of rectangular, square, circular or other shape and of rectangular or non-rectangular cross-section where such non-rectangular cross-section is achieved subsequent to the rolling process (i.e., products which have been “worked after rolling”) -- for example, products which have been beveled or rounded at the edges. Steel products that meet the noted physical characteristics that are painted, varnished or coated with plastic or other non-metallic substances are included within this scope. Also, specifically included in this scope are high strength, low alloy (HSLA) steels. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum.
Steel products to be included in this scope, regardless of Harmonized Tariff Schedule of the United States (HTSUS) definitions, are products in which: (1) iron predominates, by weight, over each of the other contained elements, (2) the carbon content is two percent or less, by weight, and (3) none of the elements listed below is equal to or exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
1.50 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.41 percent of titanium, or
0.15 percent of vanadium, or
0.15 percent zirconium.
All products that meet the written physical description, and in which the chemistry quantities do not equal or exceed any one of the levels listed above, are within the scope of these investigations unless otherwise specifically excluded. The following products are specifically excluded from these investigations: (1) products clad, plated, or coated with metal, whether or not painted, varnished or coated with plastic or other non-metallic substances; (2) SAE grades (formerly AISI grades) of series 2300 and above; (3) products made to ASTM A710 and A736 or their proprietary equivalents; (4) abrasion-resistant steels (i.e., USS AR 400, USS AR 500); (5) products made to ASTM A202, A225, A514 grade S, A517 grade S, or their proprietary equivalents; (6) ball bearing steels; (7) tool steels; and (8) silicon manganese steel or silicon electric steel.
The merchandise subject to these investigations is classified in the HTSUS under subheadings: 7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7225.40.3050, 7225.40.7000, 7225.50.6000, 7225.99.0090, 7226.91.5000, 7226.91.7000, 7226.91.8000, 7226.99.0000.
Although the HTSUS subheadings are provided for convenience and Customs purposes, the written description of the merchandise under investigation is dispositive. |