CAFTA COMMERCIAL AVAILABILITY REQUEST
|Responses with Offer to Supply||01/31/2013|
|Rebuttal to Responses with Offer to Supply||02/06/2013|
|Projected Completion Date||03/01/2013|
|Company Name||ST&R for VF Corp.|
|Product||Certain 3-layered Composite Fabric|
Fabric type: Composite fabric consisting of a 3-layered fleece/shell construction, woven outer layer and brushed inner layer, bonded with a polyurethane ("PU") membrane.
Woven Face Fabric:
Fiber Content: 83.5% to 88.5% polyester; 13.3% - 14.7% spandex
Yarn Size (single ply, warp and filling):
Textured polyester: 80.9 to 85.8 decitex/144 filament (116.5 to 123.6 Nm/144 filament) (72.8 to 77.3 denier/144 filament); Spandex: 43.1 to 45.7 decitex (218.4 to 231.8 Nm) (38.8 to 41.2 denier).
Thread Count: 44.9 - 49.6 warp ends per sq. cm by 35.2 - 41.3 filling picks per sq. cm.
Weave type: Plain weave
Weight: 118.1 to 130.2 g/sq. m (3.5 to 3.9 oz./sq. yd)
Finish: Woven face - piece dyed and/or printed; Woven back - piece dyed.
Circular Double Knit Fleece Back Pile Fabric:
Fiber content: 100% polyester
Yarn Size (single ply): 80.9 to 85.8 decitex (72.8 to 77.3 Denier) (116.5 to 123.6 Nm).
Weave type: circular double knit looped pile
Weight: 157.1 to 173.2 g/sq. m (4.6 to 5.1 oz/sq. yd)
Finish: Knit face - piece dyed; Knit back - piece dyed.
Weight: 333.3 to 367.5 gm/sq. m (9.8 to 10.8 oz/sq. yd).
Width: 130 cm (51.18 inches)
Finish: Full contact bonding
Windproof: ASTM D737 - Initial <= 1.0 cfm; 3x wash <= 1.0 cfm.
Durable water resistant: AATCC 22 - Initial >= 90 points; 10x wash >= 70 points.
High light fastness: AATCC 16 Opt 3 - Class 3.0 @ 40 hours AFU.
Low Range Hydrostatic: JIS 1092 - Initial 20,000 mm; 3x wash - 20,000 mm. AATCC 127 - Initial 20,000 mm; 3x wash 20,000 mm.
Water Vapour Permeability: JIS 1099 - Initial 20,000 g/sq. m /24 hours; 3x wash 20,000 g/sq. m /24 hours.
Water Vapour Transmission: ASTM E96 B - Initial 500 g/sq. m / 24 hours; 3x wash 500 g/sq. m /24 hours.
Remarks: Ranges above allow for a variance of up to 5 percent for fabric weight, thread count and three percent for fiber content and yarn size. NOTE: The yarn size designations describe a range of yarn specifications for yarn before knitting, dyeing and finishing of the fabric. They are intended as specifications to be followed by the mill in sourcing yarn used to produce the fabric. Dyeing, finishing and knitting can alter the characteristic of the yarn as it appears in the finished fabric. This specification therefore includes yarns appearing in the finished fabric as finer or coarser than the designated yarn sizes provided that the variation occurs after processing of the greige yarn and production of the fabric. The specifications for the fabric apply to the fabric itself prior to cutting and sewing of the finished garment. Such processing may alter the measurements.
|Fabric, Fiber, or Yarn?||Fabric|
Rebuttals to Responses:
Determination: Approved – Add product to Annex 3.25